The Xecuter R-JTAG starter kit is the very latest solution from Team Xecuter for the Xbox 360 Phat consoles. The R-JTAG is a completely new method that supersedes RGH and offers the best boot times possible on the older Phat consoles that were updated past dashboard version 14619. As many of you would know when these consoles were updated past 14619 dash the RGH 2 method was required on these consoles, with that came a complete change in how they booted and the model motherboards that were fine with RGH 1 became a nightmare with RGH 2, the Falcon was a perfect example of that, going from one of the best boot times with RGH 1 to being the very worst with RGH 2. This has now all changed with the release of the TX R-JTAG starter kits and boot times on Zephyr, Opus, Falcon, and Jasper are all coming in at around the 5 to 15 sec mark.

Note : these kits don't work with Xenon A lot of people have been a little confused at first to what R-JTAG actually is, as the team has stated a few times now this is not an improved version of RGH but more so falls into the category of a modern day JTAG instead. You will notice there is a little QSB included with the kits that resembles very closely the old Xenon JTAG QSB, so as above this latest Xecuter R-JTAG solution falls more into an improved version of JTAG than an RGH solution. The team will be releasing full install guides for the R-JTAG method once these kits have been released and we can all see the differences in the installation process of R-JTAG compared to the old RGH method. One other thing to note is that the TX R-JTAG requires the console to be running dashboard 15572 or higher, so before you start make sure to check the consoles firmware version and if not updated fix that before you start the install

Price: $50.45 Special Price: $39.95
Special Expires On: 17/12/2014

After the phenomenal success of our DGX product, we listened to a great deal of feedback from our loyal userbase and have implimented some changes to the design to make the DGX perform even better than before – especially for Trinity boards.

DGX V1.1S change log:

• Added 70cm 24WG POST_OUT Wire
• Added a ceramic cap option (Point C29) between D and GND (same as CR3 Pro) – included an optional 10pf ceramic cap
• Added a selectable 5ohm and 10ohm resistor to post_out (simple solder jumpers 1 Closed: 10ohm, 2 Closed: 5ohm, 3 Closed: 0ohm Default)
• Added a a grounded IPEX socket (Point J1) for CPU_RST (10cm IPEX cable included)
• Larger solder pads and stronger vias (C D E F 5v GND)
• Removed JTAG pin header (Programming is not required – some users tried to program their DGX and damaged it)
• Optimized code for enhanced Trinity performance. DGX 1.1 would boot the worst Trinity we had in 30 seconds (v1.0 booted in 2 minutes)
• My preferred settings for Trinity were: D: 10cm IPEX to R4D4, C: 70cm 24AWG Wire , 10pf Cap Installed, 0ohm (Default)
• My preferred settings for Corona were: D: 10cm IPEX to C5R11, C: Default wire, No Cap Installed, 10ohm

Price: $33.95 Special Price: $32.95
Special Expires On: 17/12/2015

Do you have a faulty Liteon DG-16D4S DVD in your Xbox 360 ?Are you swapping your drive to another console and are unable to program your firmware due to write protection being enabled ? Team Xecuter have done it again with these replacement PCB's.

Fits all DG-16D4S drive versions and allows you to reprogram your firmware to the board and then to set it to write protect to secure against any accidental firmware corruption / erasing.

Fits all Liteon DG-16D4S Drives

Fully compatible with 9504, 0272, 0225, 0401 and 1071 firmware revisions

Supports both MCIX and Winbond  

No Soldering Required

Write Protect enable / disable feature

Simply swap out the old board with your new board and you are good to go

Easily programmable using the X360USBPRO or compatible SATA.

Note: All replacement boards are shipped blank. You must program your consoles correct firmware version and drive key

Here are some of the practical applications on how to use/install Team-Xecuter(TX) UNLOCKED Replacement PCB v1.0 for XBOX360 (SLIM) Lite-On DG-16D4S DVD Drives.

We have added a wide range of FULL HD video tutorials on installing and using Team-Xecuter UNLOCKED Replacement PCB v1.0 for XBOX360 (SLIM) Lite-On DG-16D4S DVD Drives.

1. Soldering Team-Xecuter(TX) Unlocked Replacement PCB v1.0 on an XBOX360 (SLIM) Lite-On DG-16D4S DVD Drive

2. XBOX360 (SLIM) Drive Replacement via Team-Xecuter (TX) UNLOCKED PCB v1.0 and Flashing stock f/w using X360USBPro v1 & CK3 Lite & Molex Power Adapter

3. XBOX360 (SLIM) Drive Replacement via Team-Xecuter (TX) UNLOCKED PCB v1.0 and Flashing stock f/w using X360USBPro v1 & CK3 Mini & Molex Power Adapter

4. XBOX360 (SLIM) Drive Replacement via Team-Xecuter (TX) UNLOCKED PCB v1.0 and Flashing Stock f/w using X360USBPro v1 & CK3 Pro Rev D & Molex Power Adapter

Price: $39.95 Special Price: $29.95
Special Expires On: 22/12/2015

Compact design and feel for maximum comfort and accuracy.

Features an ultra-light anodized aluminum alloy body with soft rubber it

Price: $13.95 Special Price: $10.95

The details of the package are as follows:

Pre-Moded Reset Glitch (RGH) XBOX360 (SLIM) Trinity 4GB Internal Memory
Inernal 250GB Hard Drive
Dashboard Version 2.0.17150.0 (Freeboot)
Liteon Drive 0401 - STOCK FIRMWARE - Please note that the drive is not flashed in the basic package which means you cannot play backup discs however you can transfer/copy your original games and play via Internal or External hard drive.
1x Wireless Controller
1x Power Pack
1x AV Cord

The following softwares are installed on the 4GB Flash

- 2.0.17150.0 Kinect Dashboard (Freeboot)
- XeX Menu v1.1
- NXE2GOD
- Dash Launch v3.14
- Freestyle Dash v3.0

You can also install & configure XeX Menu, Freestyle Dash and other softwares via External USB Hard Drive

Price: $499.00 Special Price: $385.00
Special Expires On: 31/05/2016

The details of the package are as follows:

XBOX360 (PHAT) Jasper 16MB HDMI Model
Dashboard Version 2.0.17150.0 (Freeboot)
120GB Internal MS Hard Drive
Liteon 93450c/0251 Drive - Flashed with iXtreme LT+v3.0
1x Wireless Controller
1x Play & Charge Kit
1x HDMI Cable
1x Ethernet Cable
1x Power Pack
1x AV Cord

The following softwares are installed on the 120GB MS Internal Hard Drive

- 2.0.17150.0 Kinect Dashboard (Freeboot)
- XeX Menu v1.1
- NXE2GOD
- Dash Launch v3.14
- Freestyle Dash v3.0

Price: $499.00 Special Price: $365.00
Special Expires On: 01/05/2016

Some of the features of Soft-moded Wii are listed below

- Play Wii Originals Game Discs
- Play Backups Of Wii Original Game Discs
- Play GameCube Originals
- Play Backups of GameCube Original Game Discs
- Media Channel Installation (Play movies, music etc)
- Homebrew Emulator Applications
- Development of Nintendo Wii Applications & Programs.

Price: $499.00 Special Price: $285.00
Special Expires On: 06/05/2016

If your Playstation 4 shows any of the following issues then you may require this service:

-After performing official Sony update PS4 controller is unable to sync and a message is displayed on the screen

“Connect the controller using a USB cable, and then press the PS button”
- Corrupt hard-drive
- Bad-sectors in hard drive
- Unable to detect hard drive
- Unable to restore to official firmware
- Unable to update to official firmware
- System displays any of the following errors during the official update process

 Repair Procedure:-

When we receive your console we will do a full analysis on your system and confirm the issue. The analysis procedure can take 1-2 working days. We will get in touch with you after the analysis by your preferred method of contact that is stated during repair booking When the repair procedure has been completed successfully we will ship the item within 24 hours. If for any reason your console is irreparable we can discuss alternatives or send you back your original console.

Price: $99.00 Special Price: $75.00
Special Expires On: 31/08/2018